Constant-pressure Tent 5×5 Pascal Premium
The Pascal Premium 5×5 constant-pressure tent offers exceptional comfort during setup and use. Its main advantages are the Central Inflation System, water-resistant roof, and a more stable structure!
Option: roof+4 walls, with print
Call us and take advantage of free advice: +48 578 704 100
Pascal Premium 5×5
- cover made of PU-coated polyester, 235 g/m²
- water-resistant roof and walls
- insert made of durable TPU film
- safety valves to prevent overinflation
- quick setup – inflate all legs from a single valve
- additional inflatable beams to reinforce the structure
- graphic design included as part of the full-service offer
The 5×5 Pascal Premium tent differs from its original version in three key ways. First, a protective cap has been added at the top of the tent, and all roof seams are additionally taped. Thanks to this, the roof is fully warter-resistant.
Second, all the legs can now be inflated from any single valve. This is possible thanks to a system of tubes connecting the inner bladders of all legs – the Central Inflation System.
Third, to improve structural stability, we added inflatable beams above the walls. These reinforce the spider-leg structure without being visible from the outside.
The entire tent cover is made of waterproof, PU-coated polyester, 235 g/m². To increase durability, the leg bases are reinforced with tough PVC material resistant to abrasion and damage.
The core feature of an advertising tent is the ability to showcase your company’s graphics. For the Pascal tent, the best surfaces for this are the roof and sidewalls.
Our graphic designers will prepare a free print design for you, based on your input and suggestions, placing the artwork where it fits best.
Key quality details:
- Each safety valve is tested by inflating the product until the valve activates. Tested valves are marked with a green dot
- Every product is leak-tested for a minimum of 24 hours
- We add extra zipper pullers for easier wall removal
- On large tents, we install wall hooks to prevent zippers from being damaged by heavy panels
- Zigzag stitching is used to reduce tearing risk
- All guyline and anchoring rings are made of stainless steel to avoid rust stains
You can further enhance your tent with practical accessories like window walls, flooring, lighting or weights.
Option: roof+4 walls, with print
In the set:
- tent structure, printed roof and four legs in a factory color. Each leg has an inflation valve and a safety valve that protects the insert from overinflation. It is possible to order the legs with printed graphics.
- Central Inflation System allowing all legs to be inflated from any single valve
- 4 reinforcing beams attached to the legs, each with its own valve (inflated separately)
- 4 printed walls with zipper fastening
- anchoring kit, 16 spikes, 4 guy lines with carabiners, 4 twisted ground anchors, hammer, storage bag
- repair kit
- product bags
The set does not include a pump. You will need a small ladder to attach the walls.
If you need a different setup, contact us in the form and we will adjust the tent to your needs.
Size
5x5m
Height
390 cm
Entrance size
435x290cm
Leg width
31cm
Covered area
without walls
7m2
Transport dimensions
110x60x50cm
70x45x45cm
50x25x20cm
Weight
47 kg
